Technical Material Guides of Cemented Carbide Wear Resistant Parts
- Share
- publisher
- Bree
- Issue Time
- Nov 20,2026
Summary
This technical guide covers common types, grade selection, processing methods and application scenarios of cemented carbide wear resistant parts, helping industrial buyers select suitable carbide wear components for abrasion, erosion and sliding wear conditions.

Full Article Structure
1. What Are Cemented Carbide Wear Resistant Parts
Cemented carbide wear parts are custom components made of WC-Co alloy, designed to resist abrasive wear, particle erosion and friction wear. Compared with steel, carbide has far higher hardness and stable performance under continuous friction, greatly extending equipment service intervals.
2. Common Types of Carbide Wear Components
- Carbide wear blocks, wear plates and liners
- Carbide nozzles, valve seats and sealing rings
- Carbide guide rollers, positioning pins and sliding strips
- Carbide shaping dies and extrusion mould inserts
Most wear parts are non-standard, produced according to customer drawings or samples.
3. Grade Selection for Different Wear Conditions
For pure abrasive wear with low impact, low cobalt grades such as YG3 and YG6 are preferred for maximum hardness. If impact load exists, medium or high cobalt grades like YG8, YG11 are selected to avoid cracking and chipping. We test and recommend grades based on your working medium and impact frequency.
4. Machining and Surface Treatment
Wear parts can be supplied as sintered blanks, ground or polished finished pieces. Precision grinding ensures tight fitting tolerance, while polishing reduces friction coefficient for sliding contact pairs. Complex shapes are processed by wire cutting, surface grinding and CNC machining after sintering.
5. Main Application Industries
| Industry | Typical Carbide Wear Parts |
|---|---|
| Oil & Water Jet | Carbide nozzles, valve trim parts |
| Mineral & Sand Processing | Wear liners, impact blocks |
| Plastic & Rubber Extrusion | Guide strips, forming inserts |
| Wire Drawing | Wire drawing dies, wear rings |
6. Summary
Cemented carbide wear resistant parts solve abrasion and erosion problems for industrial equipment. Grade, geometry and surface finish must match the actual wear mechanism. Send us your drawing, working medium and wear failure description, we can develop custom carbide wear components for you.
Share your wear scenario and drawing files, our team develops custom cemented carbide wear resistant parts with suitable grade and tolerance.
Custom carbide wear blocks, carbide nozzle, carbide guide pin and all kinds of non-standard carbide wear inserts available.



